Ride-on vibratory rollers are important mechanical equipment for road compaction and enjoy a very important position in the market, favored by consumers.
However, many customers fail to make the most of the ride on vibratory rollers due to improper operation. This article will provide you with the operation specifications of ride-on vibratory rollers.
1. The operator of the ride-on vibratory rollers must possess a driver’s license, for professionals should do the job. During the work process, the operator must not leave the post or let other people drive.
2. Before work, the operator shall check the lubricating oil, fuel, and water tank of the ride-on vibratory rollers, and see if all the meters are in normal condition. It is also necessary to confirm that the transmission system, working device, hydraulic system, and all the pipelines are free of leakage before starting.
3. When parking the ride on vibratory rollers at the construction site, the operator shall select a safe flat place and lock the cabin door (if any). When parking on a slope, triangular wood or stones shall be used to block the wheels.
4. When people are working with the machine, no one is allowed to stand on the working face where the machine is moving forward. People shall stand outside the working face. If manual cleaning on the wheels is necessary when the hand-held or ride-on vibratory rollers roll, the cleaning shall be done behind the rollers, instead of retreating along the direction of the rollers. This is to prevent accidents caused by tripping over.
Everyone shall adhere to the specifications strictly to avoid any accidents.
