What are the main components of a plate compactor?
The plate compactor is made up of many different parts, the main parts include the engine, the bottom plate, the rammed plate, and so on.
How to make a plate compactor？
There are specific steps to make a plate compactor, which can be assembled according to the following process. Before installation, we must prepare the required materials, including a swing arm, vibration plate, generator, controller, etc.
Of course, you also need to prepare some necessary tools, such as a hammer, lubricating oil, screws, and so on. Then, we can begin to assemble the plate compactor. First, we will place the vibrating plate, or base, on a flat surface and install the swing arm on the base. Then install the generator and the tamping plate separately at the end of the swing arm and screw them in place. Then according to the technical requirements of the vibration device, we can pour lubricating oil into the tank of the vibration mechanism, so as to ensure the normal operation of the vibration mechanism. Finally, you can install the controller and the operating platform according to the situation. Finally, we can use screws to fix the components, and then follow the correct operation steps to check the plate compactor and check that there is no problem before use.
